Dimensions: 6940x2240x3120mm
Maximum total weight: 10000kg
Rated load capacity: 4000kg
Curb weight: 5550kg
Liquid loading capacity: 4000L
Maximum speed: 100km/h
Rated flow rate of water pump: 30L/s
Rated flow rate of fire monitor: 30L/s
Fire cannon range: water ≥ 60m
Drive form: 4 × 2
engine Model: 4HK1-TCG61 (190 horsepower) Type: inline four cylinder, water-cooled, turbocharged intercooled
Power: 139KW
Maximum torque/speed: 507N.m/1600-2600rpm
Displacement: 5193ml
Fuel type: diesel
Matched with four cylinder turbocharged intercooled, electronically controlled high-pressure common rail diesel engine, 139KW, 190 horsepower, National 6 emission standard. The vehicle consists of two main parts: the firefighter cabin and the body. The cabin is a modified double row design that can accommodate 3+3 people. The vehicle has an exposed tank structure, with equipment boxes in the front, water tanks in the middle, and pump boxes in the rear. The carrier tank is made of high-quality carbon steel and can hold 4 tons (4000L) of water. The vehicle is equipped with Shanghai Rongshen CB10/30 fire pump and Chengdu West PL8/30W
Driver's cabin Structure: Flat top, four door double row cab, all steel frame welded structure. Seating arrangement: 3 people in the front row (including the driver)+3 people in the back row. The backrest of the back row is equipped with 3 dedicated brackets and fixing fixtures for air respirators, and is equipped with shock absorbers and protective devices. Install guardrails and handrails in front of the seats, and firefighters can quickly carry air respirators on their backs as they rush to the fire scene for firefighting and rescue operations. Cab structure: Install a hydraulic flipping mechanism that adapts to tipping, with anti fall safety devices. Cabin equipment: In addition to the original vehicle equipment, it is equipped with a 100W alarm, power take-off control switch, and alarm light control box. Top of the cab: Install one long row of warning lights at the front position of the top of the cab.
Type: Exposed type Structure: The frame is welded, and longitudinal and transverse anti sway plates are installed inside the tank to reduce the impact of water on the tank during vehicle operation. The wall panels around the tank are designed with trapezoidal folding ribs to ensure sufficient strength and rigidity. The top of the tank is equipped with a sealed quick opening manhole cover for easy access by maintenance personnel. The bottom of the tank is equipped with a device and a filter screen to prevent the water pump from absorbing water and forming vortices that affect the flow rate. The tank is equipped with a stainless steel floating ball liquid level indicator, which can display the capacity of the fire extinguishing agent in the tank through the liquid level gauge on the dashboard. The bottom of the tank is equipped with a drain outlet with a ball valve. The tank is equipped with one 76mm overflow pipe and one 76mm water inlet on each side of the carriage, which is convenient for other vehicles to supply water and add liquid. Quality requirements for tank body: firm and reliable welding, beautiful weld seam, removal and cleaning of slag inclusion, virtual welding and other defects; After the tank is made, conduct a 24-hour hydrostatic pressure test on the tank to ensure no leakage. Equipment: 1 entrance hole with quick locking and opening device 1 overflow device 1 liquid level indicator 1 sewage outlet, equipped with quick opening ball valve Set one foam tank to foam outlet pipe of water pump 1 water inlet on each side Fire pump and piping system Fire pump model: CB10/30-RS Flow rate: 30L/s Pressure: 1.0MPa Water intake device: piston vacuum pump Water intake time: ≤ 35s Maximum suction depth: 7m Maximum vacuum degree: ≥ 85KPa Installation form: rear mounted Pipeline system Material: High quality seamless steel pipe External suction pipeline: The rear end of the water pump is equipped with a DN100mm suction port, which can absorb natural water sources. Tank outlet pipeline: There is one DN100 tank outlet pipeline, and water enters the fire pump from the tank body. It is equipped with one DN100 manual butterfly valve and connected to the water tank and fire pump through a DN100 flexible joint. Pump outlet pipeline: One DN80 atmospheric pressure outlet on each side; There is one fire monitor pipeline on the top of the vehicle; Water injection pipeline: 2 DN65 pipelines (external water injection) distributed on both sides of the pump room; 1 DN65 tank water injection pipeline, which can directly inject water into the tank through a fire pump; Residual water discharge pipeline: To protect the water pump and various ball valves, a residual water discharge pipeline is installed in the pipeline and equipped with a control ball valve. Cooling water pipeline: In order to enable the power take-off to cope with various complex situations during operation, the pipeline is equipped with cooling water pipelines, and control ball valves are installed in the inlet and outlet water pipelines. Discharge pipeline: The pipeline is equipped with a discharge ball valve. Control panel: The control instruments in the pump room include pressure gauges, vacuum gauges, tachometers, liquid level gauges, etc., and Chinese operation flowcharts and permanent signs, labels, etc. are prominently displayed. 7, Fire cannon model: PL8/30W Operation mode: manual Rated pressure: 0.8MPa Range: Water ≥ 60m Tilt/elevation angle:- 35°/+70° Horizontal rotation angle: 0-360 ° 8, Power take-off device Type: Sandwich type (full power) Manipulation: Electromagnetic valve control (electric control) Cooling method: forced water cooling Lubrication method: splash oil lubrication 9, Equipment box Material: The skeleton is made of high-quality steel, the internal equipment rack is made of aluminum alloy profiles, and the interior panel is made of aluminum oxide alloy patterned plate. Structure: All steel frame welded structure, with equipment box in the front, tank body in the middle, and pump room in the rear. Equipped with dashboard and operation panel, the equipment box and pump room are both equipped with locked rolling shutter doors. There is one aluminum alloy rolling shutter door on each side of the front equipment box, and one aluminum alloy rolling shutter door on each side of the rear pump room. The equipment box is reliable and aesthetically pleasing, with adjustable spatial layout and a large space rolling shutter door to ensure full utilization of space. The equipment box is equipped with drainage holes. The carriage and pump room are equipped with lighting fixtures to meet the lighting needs during nighttime firefighting operations. Aluminum alloy rolling shutter door: All equipment compartments and pump rooms are equipped with locked rolling shutter doors, with sturdy and durable handles and locking pins that do not deform, The sealing performance has been tested by water immersion to ensure no leakage. The sliding tracks on both sides of the rolling shutter door are fixed with rivets to prevent detachment. Each equipment compartment is equipped with lighting, which is controlled by the opening and closing of the rolling shutter door. Equipment layout principle: Design equipment integration based on combat organization and deployment; Design various equipment racks based on ergonomic principles; Place equipment according to the logical relationship and frequency of use; Use any equipment within 2 movements while standing on the ground or pedals. 10, Electrical system The top of the cab is equipped with a long row of luxurious all red LED warning lights. Install one 50W LED fire searchlight on the top of the rear of the vehicle (which can be remotely controlled to rotate 360 degrees) and one set of red and blue flashing lights. There is one set of red and white flashing lights and one lighting lamp on each side of the vehicle, equipped with front and rear clearance lights, and one turn signal light on each side. Lighting lamps are installed in the passenger compartment, equipment box, and pump room. The power of the alarm is 100W; The alarm, warning light, and flashing light circuits are independent additional circuits, and the control components are installed in the cab. The power of the alarm is 100W; The alarm, warning light, and flashing light circuits are independent additional circuits, and the control components are installed in the cab. Additional instruments and switches are centrally arranged on the control panel for easy operation. The dashboard is equipped with pressure gauges, liquid level gauges, power main switches, and equipment box light switches. 11, Appearance Vehicle color: Fire Red Car body paint: The surface of the carriage is sprayed with R03 fire red paint. To ensure night work safety, the car body is equipped with fluorescent reflective tape that meets safety standards. Vehicle identification: can be sprayed according to user requirements.
){kind=link}